A case report on a Fossa Navicularis Stricture repaired using a Transurethral Ventral Buccal Mucosal Graft Inlay Urethroplasty technique: A first in the Philippines

OBJECTIVE@#To describe the technique and report the first transurethral buccal mucosal graft ventral inlay (Nikolavsky Technique) urethroplasty done in the Philippines, in a patient who had a fossa navicularis stricture extending to the distal penile urethra.@*METHODS@#Reported here is a case of a twenty-seven-year-old male who had a 40% distal urethral mucosal tear, as seen on initial cystoscopy, following traumatic catherization. The urethral tear was initially managed with a foley catheter maintained for a month. However, the patient eventually developed a 4 cm stricture extending from the fossa navicularis to the distal penile urethra. A ventral buccal mucosal graft was placed on the denuded urethral plate as an inlay patch via the transurethral route. No skin incisions nor penile degloving was done@*RESULTS@#Total operative time was four hours, including graft harvest time, with approximately 400 ml blood loss. The patient was sent home on the 3rd postoperative day. The urethral catheter was removed after 14 days. Post-operative follow-up was performed at 0-, 3- 6- and 12-months. A repeat voiding cystourethrogram was performed at 4 weeks showing no narrowing at the prior stricture site. On 12 months follow-up, uroflowmetry showed a Q-max of 20ml/sec with minimal residual urine. LUTS symptom scoring was at 7 and IIEF-5 score of 25@*CONCLUSION@#Repair of distal urethral strictures can be done using transurethral ventral buccal mucosa graft inlay urethroplasty. It can be challenging for longer strictures (>4 cm) but easily reproducible for shorter ones. The technique demonstrated good results on medium term follow-up. To the authors’ knowledge, this is the first reported case that utilized this technique in the Philippines.

Clinical assessment of two inlay -retained bridge designs (proximal box-shaped and inlay shaped) in missing posterior teeth cases. (Randomized Clinical Trial) / Avaliação clínica de dois modelos de ponte fixa inlay (forma de caixa proximal e em forma de inlay) em casos de dentes posteriores ausentes. (Ensaio clínico randomizado)

Objective: This study aimed to evaluate the clinical performance of two inlay-retained bridge designs (proximal shaped and inlay shaped) in single missing posterior teeth cases. Material and Methods: A total of 70 cases with missing single posterior teeth were included in this study and divided into two groups with a 1:1 allocation ratio (n = 35 for each group). Group 1 (the control group): this group received an inlay retained bridge with inlay design on both abutments. Group 2 (the intervention group): this group received an inlay retained bridge with a proximal box on both abutments. PMMA resin (YAMAHACHI PMMA) was used for the try-in stage and monolithic zirconia (Katana, Kuraray) was used for the final restorations. The restoration surfaces were treated using sandblasting and Z-prime S (Bisco) and the cementation was done by using self-adhesive resin cement (Bisco). Fracture, marginal adaptation, postoperative sensitivity, caries, and gingivitis were assessed using the modified United States Public Health Service for restoration clinical assessments (MUSPHS standards) over 12 months of follow-up. Results: The results show there was no significant difference between the two groups. Kaplan-Meier survival curve was constructed to calculate the mean survival estimates of the two groups and we found that the two groups were clinically successful during a one-year follow-up. Conclusion: Both designs of inlay retained fixed dental prostheses revealed successful clinical performance in terms of Fracture, marginal adaptation, postoperative sensitivity, caries, and gingivitis (AU)

Objetivo: O objetivo deste estudo foi avaliar o desempenho clínico de dois modelos de ponte fixa por inlay (formato proximal e formato inlay) em casos de dentes posteriores perdidos. Material e Métodos: Um total de 70 casos com perda de um único dente posterior foi incluído neste estudo e dividido em dois grupos com uma razão de alocação de 1: 1 (n = 35 para cada grupo). Grupo 1 (grupo controle): Este grupo recebeu uma ponte fixa por inlay com deseho de inlay em ambos os pilares. Grupo 2 (grupo intervenção): Este grupo recebeu uma ponte fixa inlay com uma caixa proximal em ambos os pilares. Resina de PMMA (YAMAHACHI PMMA) foi usada para a etapa de try-in e a zircônia monolítica (Katana, Kuraray) foi utilizada para as restaurações finais. As superfícies das restaurações foram jateadas com Z-prime S (Bisco) e a cimentação realizada com cimento resinoso autoadesivo (Bisco). Fratura, adaptação marginal, sensibilidade pós-operatória, cárie e gengivite foram avaliadas usando o Serviço de Saúde Pública dos Estados Unidos modificado para avaliações clínicas de restauração (padrões MUSPHS) ao longo de 12 meses de acompanhamento. Resultados: Os resultados mostraram que não houve diferença significativa entre os dois grupos. A curva de sobrevida de Kaplan-Meier foi construída para calcular as estimativas de sobrevida média dos dois grupos e foi concluído que os dois grupos foram clinicamente bem-sucedidos durante um acompanhamento de um ano. Conclusão: Ambos os modelos de próteses dentárias fixas de inlay revelaram desempenho clínico bem-sucedido em termos de fratura, adaptação marginal, sensibilidade pós-operatória, cárie e gengivite(AU)

Root canal treatment of maxillary second molar with three mesial buccal root canals: a case report and literature review / 口腔疾病防治

Objective@#To explore the key points of clinical diagnosis and treatment of three mesiobuccal root canals.@*Methods@# In the procedure of endodontic therapy for the upper left second molar with pulpitis, through root canal exploration under a dental microscope and cone beam CT (CBCT)-assisted imaging examination, it was confirmed that the left upper second molar contained 3 roots and 5 root canals, among which the third root canal existed in the mesiobuccal root. Combined with perfect root canal preparation, cleaning, disinfection, filling and minimally invasive inlay repair, the clinical symptoms were eliminated. The patients were followed up and the related literatures were reviewed. @* Results @# One- and two-year follow-ups showed that the tooth had no discomfort and could be used normally. X-ray revealed that the filling was complete, and the periapical tissue was normal. The results of the literature review showed that the incidence of three mesiobuccal root canals in maxillary second molars was 0.11%-4.2%. It is difficult to find additional root canals only by X-ray imaging. Dentists should further determine the number and anatomical shape of root canals by CBCT and operating microscopy. When there are three mesiobuccal root canals in maxillary molars, dentists should avoid overpreparation. Healthy tooth tissue is the key to good prognosis. @* Conclusion@#During root canal therapy, clinicians should consider the anatomical variation of the root canal, should always be alert to the existence of an extra root canal, and should use CBCT, operating microscopy, ultrasound and various auxiliary instruments to locate and treat the variant root canal.

Combined dorsal and ventral inlay buccal mucosal graft urethroplasty for female urethral strictures (Joshi urethroplasty technique): A first in the Philippines

@#Urethral strictures in females are very uncommon. In selected populations of women who underwent urodynamic studies for obstructive symptoms, female urethral strictures represent 4-13% of the causes of bladder outlet obstruction. Literature is limited regarding surgical treatment for near-obliterative urethral strictures in female patients. In this paper, the authors aimed to report a novel technique of double-faced inlay buccal mucosal graft (BMG) urethroplasty, first described by Joshi in 2020. This is a case of a 35-year-old female with progressively worsening lower urinary tract symptoms, several months after undergoing cesarean section despite multiple internal urethrotomies. Grafts were placed both the anterior and posterior urethral walls with noted good urine flow with mild lower urinary tract symptoms on follow-up after 6 months. The combined dorsal and ventral inlay BMG urethroplasty is a feasible technique with good results for female patients with urethral strictures. To the authors’ knowledge, this is the first-ever reported case, for this novel technique, in the Philippines.

Dorsal onlay versus dorsal inlay buccal mucosal graft urethroplasty for anterior urethral stricture: a single centre retrospective study

Background: Urethral stricture is a relatively common disease. The choice of surgery is based on the stricture location, length of the stricture and etiology. Buccal mucosal graft (BMG) urethroplasty with Asopa and Kulkarni techniques, revolutionized the approach to anterior urethral stricture repair. Objective of the study was to compare both the dorsal onlay BMG urethroplasty technique of Kulkarni and the dorsal inlay BMG urethroplasty technique of Asopa for the management of long anterior urethral stricture.
Methods: From January 2015 to October 2019, a total of 90 patients with long anterior urethral strictures were randomized into two groups. Group A (42 patients) managed by Kulkarni technique. Group B (48 patients) managed by Asopa technique. BMG urethroplasty was considered successful if no further procedure required postoperatively with maximum flow rate >15 ml/s during the follow-up period.Results: The success rate in group A and B were 80.9% and 87.5%, respectively. The mean operative time was significantly longer in group A (175±22.6 min) than in group B (102±18.14 min, p-value <0.001). The average blood loss was significantly higher in group A (154±15.65 ml) than in group B (112.76±12.62 ml, p-value <0.012).Conclusions: The dorsal onlay technique of Kulkarni and the dorsal inlay technique of Asopa buccal mucosal graft urethroplasty are reliable and satisfactory procedures with good success rates and minimum complications.

Load to failure of three different monolithic zirconia inlay- retained fixed dental prosthesis designs with three surface treatments / Carga até falha de três diferentes desenhos de inlays de zircônia monolítica com três tratamentos de superfície

Objective: The purpose of the study was to evaluate the effect of different preparation designs and different surface treatments on the fracture resistance of monolithic zirconia inlay-retained fixed dental prosthesis [IRFDP]. Material and methods: Forty-five translucent zirconia IRFDPs were divided into three groups according to preparation designs (n = 15); group I: proximal box, group II: inlay-box and group III: butterfly wing (modified inlay). Each group was further subdivided into three subgroups according to the surface treatments utilized (n = 5); sandblasting, tribochemical silica coating (Cojet system) and erbium, chromium: Yttrium, scandium, gallium, garnet (Er, Cr: YSGG) laser irradiation. All zirconia IRFDPs were cemented to their respective resin models using selfadhesive resin cement. All cemented IRFDPs were subjected to fracture resistance test using universal testing machine. The initial fracture site was determined by using a stereomicroscope (x6.7magnification). Two-way analysis of variance (ANOVA) was used to evaluate the effect of different designs, different surface treatments and their interaction on the mean fracture resistance. Bonferroni's post-hoc test was used when ANOVA is significant (P ≤ 0.05). Results: Butterfly wings design showed the highest fracture resistance values followed by inlay and box designs respectively (P ≤ 0.05). Sandblasting and Cojet showed significantly the highest mean fracture resistance values than Laser with no significance difference between them. Conclusion: The butterfly wing design increased the fracture resistance of the zirconia IRFDPs. Sandblasting and tribochemical silica coating of zirconia surfaces had a greater effect than Er, Cr: YSGG laser to gain higher fracture resistance of zirconia IRRDPs (AU)

Objetivo: O objetivo do estudo foi avaliar o efeito de diferentes modelos de preparações e diferentes tratamentos de superfície na resistência à fratura de inlays de zircônia monolítica. Material e métodos: Quarenta e cinco inlays translúcidos de zircônia foram divididos em três grupos de acordo com os desenhos de preparação (n = 15); grupo I: caixa proximal, grupo II: inlay convencional e grupo III: asa de borboleta (inlay modificado). Cada grupo foi subdividido em três subgrupos de acordo com os tratamentos de superfície utilizados (n = 5); jateamento de areia, revestimento triboquímico de sílica (sistema Cojet) e érbio, cromo: ítrio, escândio, gálio, granada (Er, Cr: YSGG) irradiação a laser. Todos os inlays de zircônia foram cimentados em seus respectivos modelos de resina usando cimento de resina auto-adesivo. Todos os inlays cimentados foram submetidos a teste de resistência à fratura usando máquina de teste universal. O local inicial da fratura foi determinado usando um estereomicroscópio (ampliação de 6,7x). A análise de variância (ANOVA) de dois fatores foi usada para avaliar o efeito de diferentes desenhos, diferentes tratamentos de superfície e sua interação na resistência média à fratura. O teste post-hoc de Bonferroni foi usado quando a ANOVA foi significativa (P ≤ 0,05). Resultados: O design das asas de borboleta apresentou os maiores valores de resistência à fratura, seguidos pelos designs de inlay convencional e caixa, respectivamente (P ≤ 0,05). O jateamento de areia e o Cojet apresentaram significativamente os maiores valores médios de resistência à fratura do que o Laser, sem diferença de significânc=ia entre eles. Conclusão: O design da asa de borboleta aumentou a resistência à fratura dos inlays de zircônia. O revestimento por jato de areia e triboquímica de sílica das superfícies de zircônia teve um efeito maior que o laser Er, Cr: YSGG para obter maior resistência à fratura dos inlays de zircônia. (AU)

Minimally invasive restoration of endodontically treated teeth / 口腔疾病防治

@#The aims of tooth restoration of endodontically treated teeth are to protect the remaining dental tissue; restore coronal morphology, functions and aesthetics; prevent bacterial microleakage and ensure periodontal healthy; prevent fracture of the restorations and reduce the wear from antagonist teeth. This article reviews the preservation and minimally invasive restoration of endodontically treated teeth. The results of the literature review show that tooth fracture resistance decreases after root canal treatment, the amount of remaining tooth tissue is an important factor affecting the success of root canal treatment, and the neck is the stress concentration area of tooth tissue, the traditional full crown and postcore crown have a certain amount of abrasion on the healthy neck teeth tissue, which will further reduce the bending resistance of the teeth and may cause the teeth to fracture. With the development of bonding technology, composite resin materials and ceramic materials, there are fewer molar tissues removed when resin, inlay, onlay, overlay and inlay crown are used to repair tooth defects, which can better preserve the remaining tooth tissues, especially the neck tooth tissues. After root canal treatment, only the pulp cavity of the tooth can be directly repaired by resin. When the marginal ridge is absent, minimally invasive restoration methods, such as inlay, onlay, and inlay crown, can be selected according to the number of marginal ridges removed and the thickness of the remaining dental tissue.

Establishment and stress analysis of buccal-occlusal-lingual inlay finite element model of mandibular first molar / 口腔疾病防治

Objective@#To observe the stress distribution according to a model of the bucco-occluso-lingual (BOL) inlay of mandibular first molar after restoration to provide a basis for the clinical treatment of cracked tooth with BOL inlay.@*Methods@#A three-dimensional finite element model of mandibular first molar was established by combining micro-CT scanning technology with Mimics, UG, Ansys and Midas-FEA software. Based on this model, a BOL inlay restoration model was established. The material parameter of inlay IPS e.max CAD was given, and a Von-mises stress distribution nephogram under the same loading condition was obtained. The results of the stress distribution in each model were compared.@*Results @#The stress of intact teeth is mainly concentrated in the central fissure of the occlusal surface at the crown. The stress of the cavity after BOL inlay restoration is mainly concentrated in the mesial and distal walls of the cavity, the axial-pulpal line angle and the gingival wall. The stress of the inlay is mainly distributed at the bottom of the inlay, axial wall and the gingival wall.@*Conclusion@#BOL inlay restoration change the stress distribution in the complete dental model, which relieves the stress concentration in the fossa and groove of the occlusal surface and can play an active role in the treatment of cracked tooth.

Evaluation of resin inlay restoration after root canal therapy for deciduous molars / 口腔疾病防治

Objective @#To explore the clinical effect of composite resin inlays in repairing large areas of primary molar defects after root canal treatment to provide a reference for the restoration of carious primary molars.@*Methods@#Thirty-eight primary molars of 32 children were selected as the research objects. Indirect restoration with composite resin inlays was performed after root canal therapy. The clinical efficacy was evaluated in terms of five indices, including restoration retention, marginal integrity, gingival status, anatomical morphology and secondary caries, according to the modified USHPS evaluation criteria, at 6, 12 and 18 months after restoration.@*Results @#During the 18-month follow-up period, 36 of the 38 teeth were successfully restored, and all the evaluated items reached grade A or B. Six months after the repair, one prosthesis had fallen off, resulting in a success rate of 97.37% (37/38). The success rate remained 97.37% (37/38) 12 months after the repair; 18 months after the repair, another prosthesis had failed(Marginal integrity and anatomical morphology were grade C), reducing the success rate to 94.74% (36/38). There was no significant difference in the success rate of resin inlay repair at 6, 12 or 18 months (χ2=0.518, p=0.772).@*Conclusion@#Composite resin inlay restoration is an alternative method for repairing primary molars with large defects after root canal treatment.

BioRoot inlay: An innovative technique in teeth with wide open apex

This article reports an innovative technique in the treatment of a central incisor with a wide open apex and parallel dentinal walls. Root canal treatment was initiated, and calcium hydroxide intracanal medicament was placed in the canal for a month. The intracanal medicament was removed by instrumentation and irrigation with 3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. A light body impression of the root canal space was made and replicated the three-dimensional root canal space in a putty impression. Mineral trioxide aggregate (MTA) was condensed into the impression and allowed to set for 24 h in the presence of moisture to obtain a BioRoot inlay. This BioRoot inlay was cemented into the canal. Follow-up of every 6 months for 4 years revealed clinically asymptomatic and satisfactory healing of periapical lesion.

Stress distribution of molars restored with minimal invasive and conventional technique: a 3-D finite element analysis

PURPOSE: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. MATERIALS AND METHODS: Threedimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. RESULTS: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 – 412.9 MPa) and models with minimal cavity design (361.1 – 384.4 MPa). CONCLUSION: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

Clinical observations of all-ceramic restorations of children’s first permanent molars with severe defects / 口腔疾病防治

Objective @#To explore the therapeutic efficacy of chairside CEREC all-ceramic restorations in children with first permanent molars with severe defects and to summarize the clinical methods and procedures.@*Methods@# Forty teeth of 7-15 years old thirty-four children with first permanent molars with severe defects were selected. After careful tooth preparation, a total of 40 all-ceramic restorations (8 inlays, 32 onlays) were designed and manufactured using the CEREC 3D system, and all prostheses were bonded with composite resin cement. Immediately after treatment and after 24 months, the subjective satisfaction of the patients was assessed. The clinical efficacy was analyzed using modified USPHS criteria at 12 months and 24 months. Evaluations included secondary caries, marginal adaptation, surface texture, color matching, fracture, anatomical form, adjacency relationship and gingival health.@*Results @# For the 40 all-ceramic restorations of the first permanent molars, after 24 months, 100% of the teeth were grade A for secondary caries, surface texture and fracture of the prosthesis, and 85% of the teeth were up to grade A for the other indexes at 12 and 24 months. There were no significant differences (P > 0.05) between 12 months and 24 months. Immediately after treatment and after 24 months, the subjective satisfaction of the patients was greater than 94%. @*Conclusion @#Application of the CEREC 3D system had a clear curative effect and resulted in high satisfaction in the repair of permanent molars with severe defects in children.

A study on the machining accuracy of dental digital method focusing on dental inlay

PURPOSE: The purpose of this study was to compare the cutting method and the lamination method to investigate whether the CAD data of the proposed inlay shape are machined correctly. MATERIALS AND METHODS: The Mesial-Occlusal shape of the inlay was modeled by changing the stereolithography (STL). Each group used SLS (metal powder) or SLA (photocurable resin) in the additive method, and wax or zirconia in the subtractive method (n=10 per group, total n=40). Three-dimensional (3D) analysis program (Geomagic Control X inspection software; 3D systems) was used for the alignment and analysis. The root mean square (RMS) in the 2D plane state was measured within 50 µm radius of eight comparison measuring points (CMP). Differences were analyzed using one-way analysis of variance and post-hoc Tukey's test were used (α=.05). RESULTS: There was a significant difference in RMS only in SLA and SLS of 2D section (P < .05). In CMP mean, CMP 4 (−5.3±46.7 µm) had a value closest to 0, while CMP 6 (20.1±42.4 µm) and CMP 1 (−89.2±61.4 µm) had the greatest positive value and the greatest negative value, respectively. CONCLUSION: Since the errors obtained from the study do not exceed the clinically acceptable values, the lamination method and the cutting method can be used clinically.

Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis

PURPOSE: To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS: Three-dimensional maxillary premolar models of abutments were designed to include the following: 1) inlay with O cavity (O group), 2) inlay with MO cavity (MO group), 3) inlay with MOD cavity (MOD group), and 4) onlay (ONLAY group). A restoration of each inlay or onlay cavity was simulated using gold alloy, e.max ceramic, or composite resin for restoration. To simulate masticatory forces, a total of 140 N static axial force was applied onto the tooth at the occlusal contact areas. A finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. RESULTS: Maximum von Mises stress values generated in the abutment teeth of the ONLAY group were ranged from 26.1 to 26.8 MPa, which were significantly lower than those of inlay groups (O group: 260.3–260.7 MPa; MO group: 252.1–262.4 MPa; MOD group: 281.4–298.8 MPa). Maximum von Mises stresses generated with ceramic, gold, and composite restorations were 280.1, 269.9, and 286.6 MPa, respectively, in the MOD group. They were 252.2, 248.0, 255.1 MPa, respectively, in the ONLAY group. CONCLUSION: The onlay design (ONLAY group) protected tooth structures more effectively than inlay designs (O, MO, and MOD groups). However, stress magnitudes in restorations with various dental materials exhibited no significant difference among groups (O, MO, MOD, ONLAY).

The clinical efficacy of Dialog vario inlay teeth adjacent surface tooth repair and the influence on inflammatory factor and oxidative stress molecules in gingival sulcus fluid / 国际检验医学杂志

Objective To research the clinical efficacy of Dialog vario inlay teeth adjacent surface tooth repair and the influence on inflammatory factor and oxidative stress molecules in gingival sulcus fluid.Methods From September 2012 to September 2015,104 patients with ortho dental defects treated in the hospital were divided into study group and control group,with 52 cases in each group,control group used e-Max inlay repair,the research group used Dialog vario inlay repair.Clinical curative effect,beta interleukins-1β,6,8 (IL-β,IL-6,IL-8),tumor necrosis factor-α (TNF-α),propylene glycol (MDA),superoxide disproportionation alcohol (SOD),glutathione peroxidase (GSH-Px),gum situation were compared between two groups.Results The replacement integrity,marginal consistency,color matching and secondary caries rate in the study group were superior to those of the control group (P＞ 0.05).IL-β,IL-6,IL-8,TNF-α,MDA of study group were lower than the control group (P＜0.05).SOD and GSH-Px of study group were higher than those of the control group(P＜0.05).Periodontal status of research group was better than that of control group (P＜0.05).Conclusion The clinical efficacy of Dialog vario inlay in the repair of ortho dental defects may be related to the reduction of inflammatory reaction in gingival crevicular fluid and oxidative stress.

Evaluation on clinical effect of CAD / CAM restorations in repairing posterior tooth defects in elderly people / 吉林大学学报(医学版)

Objective:To repaire the posterior tooth defects in the elderly people with CEREC chairside CAD/CAM restorations,and to evaluate the clinical curative effect 1 year after treatment.Methods:A total of 52 posterior teeth from 48 aged patients were selected.Among them,24 cases were onlays,18 cases were inlays,and 10 cases were crowns.The inlays/onlays/crowns were designed and manufactured by CEREC chairside CAD/CAM system,and then bonded with resin cement.After 12 months,the patients were followed up.The teeth with restorations were assessed by using the modified USPHS criteria including restorations,tooth,and periodontal.At the same time,the patient's satisfaction was evaluated.Results:In all of the 52 restorations,the success rates of inlay,onlay and crown were 94.4％,91.7％ and 80.0％,respectively;among them,one inlay was fractured,one onlay did not close the edge,one onlay's edge integrity was mild defect,one teeth was fractured,one crown's adjacent relationship was not close,and one crown appeared papillitis.Conclusion:The restorations manufactured by CEREC chairside CAD/ CAM system have a good short-term clinical curative effect.It is an effective way to repair the posterior tooth defects in the elderly people.

Evaluation on clinical effect of CAD/CAM restorations in repairing posterior tooth defects in elderly people / 吉林大学学报(医学版)

Objective: To repaire the posterior tooth defects in the elderly people with CEREC chairside CAD/CAM restorations, and to evaluate the clinical curative effect 1 year after treatment. Methods: A total of 52 posterior teeth from 48 aged patients were selected. Among them, 24 cases were onlays, 18 cases were inlays, and 10 cases were crowns. The inlays/onlays/crowns were designed and manufactured by CEREC chairside CAD/CAM system, and then bonded with resin cement. After 12 months, the patients were followed up. The teeth with restorations were assessed by using the modified USPHS criteria including restorations, tooth, and periodontal. At the same time, the patient' s satisfaction was evaluated. Results: In all of the 52 restorations, the success rates of inlay, onlay and crown were 94. 4%, 91. 7% and 80. 0%, respectively; among them, one inlay was fractured, one onlay did not close the edge, one onlay's edge integrity was mild defect, one teeth was fractured, one crown's adjacent relationship was not close, and one crown appeared papillitis. Conclusion: The restorations manufactured by CEREC chairside CAD/CAM system have a good short-term clinical curative effect. It is an effective way to repair the posterior tooth defects in the elderly people.

Clinical progress on restoration by chairside CAD/CAM inlay / 口腔疾病防治

@#Tooth defects due to dental caries, trauma, abrasion, etc., are extremely common and can be treated by direct or indirect restoration. Compared with resin directly filling the body, an inlay can better restore the occlusal contact relationship and the adjacent surface contact relationship and has good mechanical properties. In recent years, with the development of ceramic materials and bonding systems and the popularity of chairside CAD/CAM technology, the chairside CAD/CAM porcelain inlay restoration program has been well received by doctors and patients because of its accuracy, convenience, aesthetics, hardness and stability, and this program is widely used clinically. This review covers the research status of various aspects such as indications and contraindications for chairside CAD/CAM inlay restoration, pre-restoration preparation, tooth preparation, hole type, impression taking and design, porcelain block selection, bonding, polishing, postoperative doctor’s instructions, and common postoperative complications. It is expected to provide a reference for the clinical application of and research on chairside CAD/CAM inlay restoration technology.

Comparison of the Clinical Efficacy and Safety of Different Restorations for Deciduous Teeth Defect / 现代生物医学进展

Objective:To investigate the curative effect of different restorations for deciduous teeth defect of children.Methods:67 children with teeth defecting seriously and being unable to fill restore were enrolled from January 2011 to January 2015 and randomly divided into three groups,one group of patients accepted metal crown restoration (Group A,n=22),one group adopted ceramic inlay restoration (Group B,n=22),and the last one accepted silver amalgam filling (Group C,n=23),the curative effect and incidence of adverse reactions among three groups in the period follow-up were compared.Results:In the period of 18-month follow-up,6 patients of toothache,5 patients of food impaction and crevices between restorations and teeth,3 cases of gingival congestion,2 cases of secondary caries were observed in group C;3 cases of toothache,1 case of food impaction,gingival congestion,crevices between restorations and teeth and secondary caries were observed in group B;2 cases of toothache and food impaction,1 case of gingival congestion were observed in group A.The incidence of adverse reactions in group A and group B was lower than those in group C (P＜0.05),which was lower in group A than that in group B,but no significant difference was found between group A and group B (P＞0.05).Conclusion:The restoration of metal crown and ceramic inlay deserved popularization had better curative effect and safety for deciduous teeth defect of children than silver amalgam filling.

Application of three-dimensional finite element method in different dental restorations / 口腔疾病防治

@#Three-dimensional finite elemennt method (3-D FEM) is an approach to simulate the intraoral environment by fabricating virtual model in computer software, to provide various options of restorations according to the requirements of study, and finally to give relevant mechanic data for clinical reference by stress analysis. 3-D FEM has been applied in stomatological research more and more widely in recent years. This review has summarized the applications of 3-D FEM in various kinds of dental restorations.